HP proliant dl380 g7 633407-001 ユーザーズマニュアル
Removal and replacement procedures 47
To replace the component, reverse the removal steps. When re-installing the fans, press down on the top of
each fan to be sure it is seated properly.
Expansion slot covers
CAUTION:
To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCI riser cage.
CAUTION:
For proper cooling, do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
1.
2.
3.
Remove the access panel ("
" on page
4.
Remove the PCI riser cage ("
" on page
5.
Remove the expansion slot cover:
o
To remove slot cover 1 or 4, push in on the retainer to release it, and then slide out the cover.