HP proliant gbe2 ユーザーズマニュアル
19
•
MAC address user management sorting on a per port and per VLAN basis
•
Manual, or automatic IP settings via a BOOTP server
•
Three switch configuration settings in memory (active, back-up, and factory); any can be selected as the current version.
•
Redundant firmware images in memory; either image can be selected as the current runtime version.
•
Ability to restore switch to factory default settings
•
TFTP and SCP to upload and download (save, restore, and update) the switch configuration file
•
TFTP to upload and download (save, restore, and update) the switch firmware
•
XModem to download the switch firmware (restore and update) via the serial interface
•
Switch configuration retention after firmware upgrade
•
HP Support Paq automated firmware upgrade process for Windows deployment stations
•
Human read/write configuration file for viewing, printing, and editing
•
DNS (Domain Name Service) client supporting primary and secondary DNS servers
•
Pre-configured customized port naming with respect to server blade NIC connectivity
•
ARP cache management table to display, add, and delete entries
•
Ability to name ports on a per port basis
•
Full ability to enable and disable any port (both internal and external ports) on both switches
•
Two port disable levels: temporary (reverts to enable at switch boot) and permanent disable
Switch diagnostics and monitoring
•
One serial port and two Ethernet ports conveniently located on the front of each switch for additional uplinks and local
management, port mirroring, and other administration and diagnostic tasks
•
Front panel per port speed and per port link activity LED annunciation panel per switch
•
System, management, and option compatibility status LEDs
•
Per port speed and link activity LEDs adjacent to all external Ethernet ports
•
Port mirroring with ability to mirror desired type of frames (egress, ingress, or both)
•
Port mirroring single or multiple source ports to single destination port
•
Switch statistic monitoring including port utilization, data packets received/transmitted, port error packets, packet size, trunk
utilization, SNMP data, etc
•
System reporting such as port parameters and link status, switch asset information, configuration values, log entries, etc.
•
SNMP v1 with two configurable community strings and SNMP trap manager hosts
•
MIB-II, Bridge MIB, Interface MIB, Extended Bridge MIB, Ethernet-like MIB, Entity MIB, RADIUS Authentication Client MIB,
802.3-2002 Link Aggregation MIB, and HP enterprise switch MIBs
•
Bridge, remote monitoring, and switch environmental traps
•
Script utility to simplify registering (compiling) switch MIBs with Insight Manager 7
•
Insight Manager 7 automatic discovery, identification, and receiving of traps and events, upon registration of MIBs
•
Insight Manager 7 graphical representations of switches (planned for 4Q2003)
•
Insight Manager 7 standard database activities (queries, tasks, reporting, etc)
•
Power on self test (POST) at boot for hardware verification
•
Portable Diagnostic Station to configure, upgrade, and diagnose an interconnect switch and server blade removed from the
rack environment
•
Ability to return switch to a valid firmware image in case of firmware corruption
•
Local system log (syslog) with ability to view and clear messages
•
Remote syslog with support for a primary and secondary syslog server
•
Ping capability to test the connectivity on the Ethernet network
•
Trace route to identify the path used for station-to-station connectivity across the network
•
Settable NVRAM diagnostic flags
•
View information, clear, and delete specific MAC addresses from the forwarding database for identifying problems with
MAC address learning and packet forwarding
•
ARP table view, clear, entry, and delete for identifying problems with ARP entries
•
Display management processor trace buffer and snap or post-mortem trace buffer