HP proliant dl785 ユーザーズマニュアル
System Unit
System Unit
System Unit
System Unit
Dimensions
Dimensions
Dimensions
Dimensions (H x W x D)
(with bezel)
(with bezel)
12.04 x 17.32 x 27.4 in (30.58 x 44 x 69.6cm)
Weight
Weight
Weight
Weight
(approximate)
(approximate)
Maximum
(all hard drives, power
supplies, and processors
installed)
(all hard drives, power
supplies, and processors
installed)
160lb (72 kg)
Minimum
(one hard drive, 2 power
supply, and 4 processor
modules installed)
(one hard drive, 2 power
supply, and 4 processor
modules installed)
147 lb (67 kg)
Input Requirements
Input Requirements
Input Requirements
Input Requirements
(per 3 power supplies non
redundant)
(per 3 power supplies non
redundant)
Rated Line Voltage
90 - 132 VAC
180 - 264 VAC
180 - 264 VAC
Rated Input Current
24A @ 100 VAC
14A @ 200 VAC
14A @ 200 VAC
Rated Input Frequency
47 to 63 Hz
Rated Input Power
2400W @ 100-120 VAC
2800W @ 200-240 VAC
2800W @ 200-240 VAC
BTU Rating
BTU Rating
BTU Rating
BTU Rating
Maximum
8189 BTU/hr @ 100-120 VAC
9554 BTU/hr @ 200-240 VAC
9554 BTU/hr @ 200-240 VAC
Power Specifications
Power Specifications
Power Specifications
Power Specifications
To review typical system power ratings use the Power Calculator which is
available via the online tool located at URL:
available via the online tool located at URL:
Click on the system of interest. Example: DL785 G5
Follow the instructions of the next screens
Follow the instructions of the next screens
Power Supply Output
Power Supply Output
Power Supply Output
Power Supply Output (per
power supply)
power supply)
Rated Steady-State Power
800 W (at 100 VAC),
1200 W (at 200 VAC)
1200 W (at 200 VAC)
Maximum Peak Power
800 W (at 100 VAC),
1200 W (at 200 VAC)
1200 W (at 200 VAC)
System Inlet Temperature
System Inlet Temperature
System Inlet Temperature
System Inlet Temperature Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed. System performance may be reduced if
operating with a fan fault or above 30°C (86°F).
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed. System performance may be reduced if
operating with a fan fault or above 30°C (86°F).
Non-operating
-30° to 60° (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
change is 20°C/hr (36°F/hr).
Relative Humidity
Relative Humidity
Relative Humidity
Relative Humidity
(non-condensing)
(non-condensing)
Operating
10% to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bult temperature, non-
condensing.
(82.4°F) maximum wet bult temperature, non-
condensing.
Non-operating
5% to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature, non
condensing.
(101.7°F) maximum wet bulb temperature, non
condensing.
QuickSpecs
HP ProLiant DL785 Generation 5 (G5)
HP ProLiant DL785 Generation 5 (G5)
HP ProLiant DL785 Generation 5 (G5)
HP ProLiant DL785 Generation 5 (G5)
Technical Specifications
DA - 13046 Worldwide — Version 4 — May 21, 2008
Page 37