HP ProLiant ML330 G6 ユーザーズマニュアル

 

Hardware options installation 74 

o 

Close or install the tower bezel, as needed. 

o 

Slide the server back into the rack. 

13. 

Power up the server (on page 

 

Retaining the recovery key/password 

The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after 

BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery 

key/password is required to enter Recovery Mode after BitLocker™ detects a possible compromise of 

system integrity. 
To help ensure maximum security, observe the following guidelines when retaining the recovery 

key/password: 

•

 

Always store the recovery key/password in multiple locations. 

•

 

Always store copies of the recovery key/password away from the server. 

•

 

Do not save the recovery key/password on the encrypted hard drive. 

 

Enabling the Trusted Platform Module 

1. 

When prompted during the start-up sequence, access RBSU by pressing the F9 key. 

2. 

From the Main Menu, select Server Security. 

3. 

From the Server Security Menu, select Trusted Platform Module. 

4. 

From the Trusted Platform Module Menu, select TPM Functionality. 

5. 

Select Enable, and then press the Enter key to modify the TPM Functionality setting. 

6. 

Press the Esc key to exit the current menu, or press the F10 key to exit RBSU. 

7. 

Reboot the server. 

8. 

Enable the TPM in the OS. For OS-specific instructions, see the OS documentation. 

  

 

CAUTION: 

 When a TPM is installed and enabled on the server, data access is locked if you 

fail to follow the proper procedures for updating the system or option firmware, replacing the 

system board, replacing a hard drive, or modifying OS application TPM settings. 

  

For more information on firmware updates and hardware procedures, see the HP Trusted Platform Module 
Best Practices White Paper on the HP website (

For more information on adjusting TPM usage in BitLocker™, see the Microsoft website