HP ProLiant ML330 G6 ユーザーズマニュアル

 

Configuration and utilities  81 

 

CAUTION:

  Perform a backup before running the System Erase Utility. The utility sets the system 

to its original factory state, deletes the current hardware configuration information, including 

array setup and disk partitioning, and erases all connected hard drives completely. Refer to the 

instructions for using this utility. 

  

Run the Erase Utility if you must erase the system for the following reasons: 

•

 

You want to install a new operating system on a server with an existing operating system. 

•

 

You encounter an error when completing the steps of a factory-installed operating system installation. 

The Erase Utility can be accessed from the Maintenance Utilities menu of the SmartStart CD ("

 

StorageWorks library and tape tools 

HP StorageWorks L&TT provides functionality for firmware downloads, verification of device operation, 
maintenance procedures, failure analysis, corrective service actions, and some utility functions. It also 

provides seamless integration with HP hardware support by generating and emailing support tickets that 

deliver a snapshot of the storage system.  
For more information, and to download the utility, refer to the StorageWorks L&TT website 
(

 

HP Systems Insight Manager 

HP SIM is a web-based application that allows system administrators to accomplish normal administrative 
tasks from any remote location, using a web browser. HP SIM provides device management capabilities 

that consolidate and integrate management data from HP and third-party devices. 

  

 

IMPORTANT:

  You must install and use HP SIM to benefit from the Pre-Failure Warranty for 

processors, SAS and SATA hard drives, and memory modules. 

  

For additional information, refer to the Management CD in the HP ProLiant Essentials Foundation Pack or 
the HP SIM website (

 

Management Agents 

Management Agents provide the information to enable fault, performance, and configuration 
management. The agents allow easy manageability of the server through HP SIM software, and third-

party SNMP management platforms. Management Agents are installed with every SmartStart assisted 

installation or can be installed through the HP PSP. The Systems Management homepage provides status 

and direct access to in-depth subsystem information by accessing data reported through the Management 
Agents. For additional information, refer to the Management CD in the HP ProLiant Essentials Foundation 

Pack or the HP website (

 

Redundant ROM support 

The server enables you to upgrade or configure the ROM safely with redundant ROM support. The server 

has a 8-MB ROM that acts as two, separate 4-MB ROMs. In the standard implementation, one side of the 

ROM contains the current ROM program version, while the other side of the ROM contains a backup 

version.