HP sas dl360 ユーザーズマニュアル

 

The server enables you to upgrade or configure the ROM safely with redundant 
ROM support. The server has a 4-MB ROM that acts as two, separate 2-MB 
ROMs. In the standard implementation, one side of the ROM contains the current 
ROM program version, while the other side of the ROM contains a backup 
version. 

NOTE:  The server ships with the same version programmed on each 
side of the ROM. 

 

When you flash the system ROM, ROMPaq writes over the backup ROM and 
saves the current ROM as a backup, enabling you to switch easily to the alternate 
ROM version if the new ROM becomes corrupted for any reason. This feature 
protects the existing ROM version, even if you experience a power failure while 
flashing the ROM. 

 

To access the redundant ROM through RBSU: 

1.  Access RBSU by pressing the F9 key during powerup when the prompt is 

displayed in the upper right corner of the screen. 

2.  Select Advanced Options. 

3.  Select Redundant ROM Selection. 

4.  Select the ROM version. 

5.  Press the Enter key. 

6.  Press the Esc key to exit the current menu or press the F10 key to exit 

RBSU. The server restarts automatically. 

To access the redundant ROM manually: 

1.  Power down the server ("Powering down the server" on page 

2.  Remove the access panel ("Removing the access panel" on page 

3.  Set positions 1, 5, and 6 of the system maintenance switch to On.