HP sas dl360 ユーザーズマニュアル
Server component identification
9
Item Description
Status
3
Internal health LED
Green = System health is normal.
Amber = System is degraded. To identify the component in a
degraded state, refer to "System board LEDs (on page
degraded state, refer to "System board LEDs (on page
)."
Red = System critical. To identify the component in a critical
state, refer to "System board LEDs (on page
state, refer to "System board LEDs (on page
Off = System health is normal (when in standby mode).
4
External health LED
(power supply)
(power supply)
Green = Power supply health is normal.
Amber = Power redundancy failure occurred.
Off = Power redundancy failure has occurred. When the server
is in standby mode, power supply health is normal.
is in standby mode, power supply health is normal.
5
NIC 1 link/activity LED
Green = Network link exists.
Flashing green = Network link and activity exist.
Off = No link to network exists.
If power is off, view the LEDs on the RJ-45 connector for status
by referring to the rear panel LEDs ("Rear panel LEDs and
buttons" on page
by referring to the rear panel LEDs ("Rear panel LEDs and
buttons" on page
6
NIC 2 link/activity LED
Green = Network link exists.
Flashing green = Network link and activity exist.
Off = No link to network exists.
If power is off, the front panel LED is not active. View the LEDs
on the RJ-45 connector for status by referring to the rear panel
LEDs ("Rear panel LEDs and buttons" on page
on the RJ-45 connector for status by referring to the rear panel
LEDs ("Rear panel LEDs and buttons" on page