Canon 3983B001 ユーザーズマニュアル

145

Displaying the Overlay

You can display gridlines for vertical and horizontal guidance, or a 3:2 guide 
to confirm the printable area for postcard size prints.

●

Choose [Disp. Overlay], then press the 

qr 

buttons to choose an option.

Changing the IS-Mode Settings

●

Choose [IS Mode], then press the 

qr buttons 

to choose an option.

Grid Lines

A grid overlays the display.

3:2 Guide

The areas outside the 3:2 range are 
grayed out. This area will not print 
when printing on paper with a 3:2 
aspect ratio.

Both

Both grid lines, and the 3:2 guide will 
display.

•

In 

 mode, you cannot set [3:2 Guide] or [Both].

•

Grid Lines will not be recorded on the image.

•

The gray areas displayed with [3:2 Guide] are the areas that will not be 
printed. The actual image recorded will include the portion in the gray areas.

Continuous

Image stabilization is always on. You 
can confirm the result directly on the 
display, which makes it easier to check 
the composition or focus.

Shoot Only

Image stabilization is only active at the 
moment of shooting.

Panning

Image stabilization only counters up 
and down motion. This option is 
recommended for shooting objects 
moving horizontally.

•

If camera shake is too strong, attach the camera to a tripod. It is 
recommended to set the IS Mode to [Off] when the camera is attached 
to a tripod.

•

When using [Panning], hold the camera horizontally. Image stabilization 
does not work when the camera is held vertically.

CO

PY