Black & Decker X810 取り扱いマニュアル

-4-

•  Before use, check the appliance for 

damaged or defective parts. Check for 

breakage of parts, damage to switches 

and any other conditions that may 

affect its operation.

•  Do not use the appliance if any part is 

damaged or defective.

•  Have any damaged or defective parts 

repaired or replaced by an authorised 

repair agent.

•  Before use, check the power supply 

cord for signs of damage, ageing and 

wear.

•  Do not use the appliance if the power 

supply cord or mains plug is damaged 

or defective.

•  If the power supply cord or mains plug 

is damaged or defective it must be 

repaired by an authorised repair agent 

in order to avoid a hazard. Do not cut 

the power supply cord and do not 

attempt to repair it yourself.

•  Never attempt to remove or replace any 

parts other than those specified in this 

manual.

This product must be earthed. 

Always check that the mains voltage 

corresponds to the voltage on the rating 

plate.

•  Power tool plugs must match the outlet. 

Never modify the plug in any way. Do 

not use any adapter plugs with earthed 

(Class 1) appliances. Unmodified plugs 

and matching outlets will reduce the 

risk of electric shock.

•  A 3 core cable must be used as your 

tool is earthed and of class 1 

construction.

•  Up to 30m (100 ft) can be used without 

loss of power.

•  This appliance is not intended for use by 

young or infirm persons without 

supervision. Children must be 

supervised to ensure they do not play 

with the appliance.

•  If the supply cord is damaged, it must 

be replaced by the manufacturer or an 

authorised Black & Decker Service 

Centre in order to avoid a hazard.

•  Always route the cord carefully to avoid 

a tripping hazard.

•  Do not use the appliance near water.

•  Do not place the appliance near heat 

sources or directly under cabinets. Do 

not use the appliance in the presence of 

explosive or flammable materials.

•  The filling apperture must not be 

opened during use.

•  Steam may escape from the soleplate.

•  Surfaces may be hot during use and 

during the cooldown period.