Canon canoscan fs2720u マニュアル

114

Appendices

Can’t start CanoCraft FS from within another application

Cause:

Scanner settings not correctly set in the application program

Solution:

Correct the scanner settings in the application program. See
the manual for the application program for instructions.

[CanoCraft FS or CanoCraft FS Copy is running. Close it and run this
program] message displays

Cause1:

You attempted to start CanoCraft FS when CanoCraft FS

Copy was already running

Solution1: Close CanoCraft FS Copy before starting CanoCraft FS.

Cause2:

You attempted to start CanoCraft FS Copy when CanoCraft

FS was already running

Solution2: Close CanoCraft FS before starting CanoCraft FS Copy.

Problems with Scanning
[Initializing film scanner. Please remove film] message displays

Cause 1:

Scanner power turned on with a film already inserted

Solution:

Remove the film and follow the instructions on the screen.

Cause 2:

Set period of time passed without scanner being operated

after power turned on

Solution:

Remove film and follow the instructions on the screen.

Image is vertically or horizontally inverted

Cause:

Film is inserted upside down or backwards

Solution 1: Insert the film with the correct orientation. (Getting Started

Guide)

Solution 2: Click the Rotate/Flip button and change the orientation of

Brightness of preview image and scanned image are different

Cause:

Display brightness settings are incorrect

Solution:

Adjust display brightness settings. (Display manual)