Canon CanoScan D2400UF ユーザーガイド

2. Select the Film Type and Film Size of

the loaded film.

All three film types, 35 mm film, 120 format and 4"x5"
format films, can be scanned using this method.

1. Start ScanGear CS-U from within an application

program according to the instructions in the Quick
Start Guide.

This illustration shows the Simple Mode.

2. In the [Image Source] category, select [Film].

• In Advanced Mode, you can set the film settings by

clicking the [D1230U] or [D2400U] tab.

3. Select the film type and film size of the loaded film.

• The Film Type and Film Size categories appear when

the film option is selected in Step 2.

These settings can be adjusted in the Advanced Mode’s [D1230U] or [D2400U] tab.

Auto Exposure
Automatically adjusts the exposure
compensation to an optimal value.

Save Exposure Data
Saves the exposure data
for a particular frame,
making it available for
scanning subsequent
frames.

Remove Dust and Scratches
(CanoScan D2400U)
Removes small dirt spots or
scratches. Scan between 25-
2400 dpi scanning resolution.

After adjusting the film settings, initiate the scan according to the instructions in the Quick
Start Guide.

Only 35 mm film can be scanned with
this method. The fax and email
functions cannot be used.

1. Press the Film Scan Button on the

top of the film adapter unit.

2. Click the [Copy] button.

3. Select a Film type, Image quality,

Scan frame type, and a frame for
scanning (35 mm film strips) and
click the [OK] button.

• Frame Button No. 1 corresponds to

the frame at the extreme right of the
film guide.

4. Select the Paper size and Print size

and click the [OK] button.

5. Set the number of copies and click

the [OK] button.
• The printer will print out the

scanned images.

• The scanned size of an image is slightly

smaller than its frame size.

• Up to three frames of 35 mm film can

be scanned consecutively. Set the
number of frames to be scanned with
the Frame Selection buttons. Please
note that with certain films the gaps
between frames may be included with
the images in consecutive scans. If this
happens, scan frames singly.

• In the Print size category, you can

select between the L, LL, postcard, etc.

• For more detailed instructions,

please refer to the ScanGear
Toolbox User’s Guide (electronic
manual) on the CD-ROM.

• All three film types, 35 mm film, 120

format and 4"x5" format films, can
be scanned using this method.

• Display the Film menu by clicking the

[Preferences] menu and selecting [Film].

1. Click the [Preferences]

menu and select
[Film].

Auto Exposure
Automatically adjusts the exposure compensation to an optimal value.

Save Exposure Data
Saves the exposure data for a particular frame, making it available for scanning subsequent frames.

Remove Dust and Scratches
(CanoScan D2400U)
Removes small dirt spots or scratches. Scan
between 25-2400 dpi scanning resolution.

• Only 35 mm film can be scanned

using this method. The fax function
cannot be used.

1. Press the Film Scan Button on the

top of the film adapter unit.

2. The Canon Scanner Assistant will

appear. Select [Copy] and click the
[Next] button.

3. Select a Film Type, Scan Frames, and

a frame for scanning (for 35 mm film
strips), and click the [Next] button.

• Frame Button No. 1 corresponds to

the frame at the extreme right of
the film guide.

4. Select the Paper Size, Print Size and

Print Layout, and click the [Next]
button.

5. Set the number of copies and other

settings, and click the [Print] button.
• The printer will print out the

scanned images.

• The scanned size of an image is slightly

smaller than its frame size.

• Up to three frames of 35 mm film can

be scanned consecutively. Set the
number of frames to be scanned with
the Frame Selection buttons. Please
note that with certain films the gaps
between frames may be included with
the images in consecutive scans. If this
happens, scan frames singly.

• In the Print Size category, you can

select between the L, LL, postcard, etc.

• For more detailed instructions,

please refer to the CanoScan
Toolbox User’s Guide (electronic
manual) on the CD-ROM.

1. Press the Film Scan Button on the

top of the film adapter unit.

2. The Canon Scanner Assistant will

appear. Select [Show CanoScan
Toolbox Toolbar before scanning],
and click the [Next] button.

3. In the toolbar that displays, click

[Scan].

Canon Plug-in Module CS-U will
start.

1. Start Canon Plug-in Module CS-U

from within an application program
according to the instructions in the
Quick Start Guide.

• For more detailed instructions, please refer to the Canon Plug-in Module CS-U

User’s Guide (electronic manual) on the CD-ROM.

After adjusting the film settings, initiate the scan according to the instructions in the
Quick Start Guide.