Canon DR-5060F ユーザーズマニュアル
72
When an Error Code is Displayed
Error code
H01
Cause
The optional imprinter’s ink cartridge is not installed.
Remedy
Install the imprinter cartridge.
Error code
H02
Cause
Endorser (option) connection error
Remedy
Connect the endorser properly.
Error code
H03
Cause
The imprinter ink cartridge is not mounted, or an endorser
connection error has occurred.
connection error has occurred.
Remedy
Attach the ink cartridge or endorser properly.
Error code
J18
Cause
A document was skewed.
Remedy
Remove the jammed document from the scanner, and check which
was the last scanned image.
was the last scanned image.
Error code
LP
Cause
The lamp has reached the end of its service life.
Remedy
Contact a Canon service department, and replace the lamp.
Error code
U01
Cause
The number of document sheets to be scanned exceeds the
set number of sheets in the verify scan.
set number of sheets in the verify scan.
Remedy
Two or more sheets may have been fed simultaneously when the
number of sheets is counted. Press the Stop key to reset the
counter to “0”. Check the number of sheets to see if all document
sheets have been counted, and scan the document again.
number of sheets is counted. Press the Stop key to reset the
counter to “0”. Check the number of sheets to see if all document
sheets have been counted, and scan the document again.
Error code
U02
Cause
The number of scanned document sheets is less than the set
number of sheets in the verify scan.
number of sheets in the verify scan.
Remedy
Two or more sheets may have been fed simultaneously when the
document is scanned. Press the Stop key to reset the counter to
“0”. Check the number of scanned images with the number of
document sheets to see if all document sheets have been correctly
scanned, and scan the document again.
document is scanned. Press the Stop key to reset the counter to
“0”. Check the number of scanned images with the number of
document sheets to see if all document sheets have been correctly
scanned, and scan the document again.
Error codes
P00, P01, P02, P04, P06, P10, P20
Cause
Scanner paper jam
Remedy
Remove the jammed paper. (See “Paper Jam in the Paper Eject
Section” P. 61)
Section” P. 61)
Error code
P30
Cause
Endorser paper jam
Remedy
Remove the paper jammed from inside the endorser according to
the Endorser Instructions.
the Endorser Instructions.