Canon fax-jx200 ユーザーズマニュアル

Sending Faxes

z

To cancel manual redialing, press [Stop]. You may then need to press [Start/Copy] for a few 
seconds to feed out the document. See “Jams in the Document Tray” on page 53.

„

z

When you are sending a document and the receiving party’s line is busy, the fax waits the 
specified time and then dials the same number again. You can set the fax to redial several times 
if previous attempts fail because of a busy signal. 
Automatic redialing can be turned off and on. The number of redialing attempts and the time 
interval between attempts can also be adjusted (see page 39).
If all redialing attempts are unsuccessful, the fax will cancel the transmission. You can set the fax 
to print an ERROR TX REPORT to remind you that the transmission was not completed (see 
page 38).
When automatic redialing is in use, the LCD displays <AUTO REDIAL> while it is waiting to 
redial.

z

Press [Stop].

z

You can set the following options for automatic redialing:
z

Whether or not the fax redials automatically.

z

The number of times the fax attempts to redial.

z

The time interval between redialing attempts.

Press [Menu].

Use [{] or [}]  to select <DATA REGSTRATION>, then press [Start/Copy]. The 
LCD displays <USER SETTINGS>.

Use [{] or [}]  to select <TX SETTINGS>, then press [Start/Copy]. The LCD 
displays <ECM TX>.

Use [{] or [}]  to select <AUTO REDIAL>, then press [Start/Copy]. The LCD 
displays <ON>.

z

To disable automatic redialing, use [{] or [}] to select <OFF>, then press [Start/Copy]. 
Press [Stop] to return to standby mode.

z

To enable automatic redialing, use [{] or [}] to select <ON> and continue with the steps 
below.

Press [Start/Copy] twice. The LCD displays <2TIMES>.

If you want to cancel a memory-sending transmission while the fax is waiting to redial, you will 

have to delete the document from memory (see page 35).