Canon fax-jx200 ユーザーズマニュアル

Settings and Activity Reports

You can set the fax to print an activity report only when an error occurs during transmitting. See 
<TX REPORT> on page 38.

„

Normally the fax does not print an activity report for receiving, but you can set the fax to print an 
activity report every time you receive a document. See <RX REPORT> on page 38.
You can set the fax to print an activity report only when an error occurs during receiving. See 
<RX REPORT> on page 38.

„

Lists the result of a sequential broadcasting.
If you set the fax to print a <TX REPORT> and then use sequential broadcasting, a MULTI TX 
REPORT will be printed instead of a TX (Transmission) REPORT. See <TX REPORT> on 
page 38.

A memory clear report is printed automatically when power is restored after a power failure. See 

“Memory Clear Report” on page 61.