Canon ir2016, ir2020 マニュアル

3-6

F-3-30

1) Remove the harness from the four wire saddles [1] and three mini-clamps

[2], and then remove the four binding screws (M3 x 4) [3].

2) Disconnect the connector [4], and then remove the tray clock sensor [5].

F-3-31

1) Remove the screw [1], and then remove the sensor mounting plate [2].

2) Remove the harness from the two wire saddles [3], and then remove the

reusable band [4].

F-3-32

1) Remove the two RS tightening screws (M3 x 8) [1], and then detach the

rear cover [2] of the tray.

F-3-33

1) Holding the stack tray [1], remove it in the direction of the arrow.

F-3-34

1) Remove the two P tightening screws (M4 x 12) [1], and then remove the

bottom cover [2] of the optional tray.

F-3-35

1) Disconnect the four connectors [1], remove the three binding screws (M3

x 4) [2], and then remove the optional tray driver PCB [3].

[1]

[1]

[5]

[4]

[2]

[3]

[3]

[4]

[3]

[2]

[1]

[1]

[2]

[1]

[1]

[2]