Canon GM-1000 ユーザーズマニュアル
CANON Digital Galvano Scanner System GM-1000 Series
Users Manual 1.20
Users Manual 1.20
46
⑤
Servo ON/OFF
Start or stop servo control.
⑥
High-speed serial
communication
selection
Select the high-speed serial communication command or RS232C
command input for position specification.
(For details, see 4.4. Position Command Input by High-speed
Serial Communication)
(Start = High-speed serial communication, OFF = RS-232C
command)
command input for position specification.
(For details, see 4.4. Position Command Input by High-speed
Serial Communication)
(Start = High-speed serial communication, OFF = RS-232C
command)
⑦
Tab selection
The screen of each function can be displayed by tab selection.
(A detailed explanation of the screen is shown when each function
is displayed.)
(A detailed explanation of the screen is shown when each function
is displayed.)
⑧
Control display
This area displays the screen of each function selected by a tab at
⑦
⑦
.
⑨
Status display
The controller status of two axes is displayed.
If press the alarm button during alarm light on, windows content the
alarm details will come up.
If press the alarm button during alarm light on, windows content the
alarm details will come up.
⑩
Alarm clear
Clears the alarm. The alarm lamp turns off.
⑪
Soft reset button
Press this button for soft reset.
⑫
Command input
screen
Allows direct command input.
⑬
DSP version
display
The version of the controller software is displayed.
During troubleshooting, the support staff may ask for the version
number.
During troubleshooting, the support staff may ask for the version
number.