Canon image formula dr-c125 ユーザーズマニュアル

24

The scanner can scan documents ranging in size from business cards 
to Legal/A4. The document sizes that this scanner can scan are 
shown below.

Size

Width: 50.8 mm to 216 mm (2" to 8.5")
Length: 53.9 mm to 356 mm (2.12" to 14")*

Paper thickness:

When U-turn path: 52 to 128 g/m

2

 (14 to 34 lb bond)

0.06 to 0.15 mm (0.0024" to 0.0059")

When straight path: 40 to 209 g/m

2

 (11 to 58 lb bond)

0.05 to 0.25 mm (0.002" to 0.0098")

* Setting the scanner to Long Document mode enables documents 

up to 3,000 mm (118.1") long to be scanned. For details on Long 
Document mode, refer to 

.

The documents to be scanned must satisfy certain criteria. Read the 
following items carefully.
• When scanning multiple documents of different sizes, place the 

documents so that they cover the entire span of the feed rollers.

• It is recommended that documents exceeding 356 mm (14") in size 

are fed one sheet at a time.

• Use the straight path when scanning documents that are 70 mm 

(2.76") long or less.

• Scanning documents before the ink is dry can cause problems with 

the scanner. Always make sure that the ink on a document is dry 
before scanning it.

• Scanning documents that are written in pencil or similar material 

may make the rollers and scanning glass dirty, which can lead to 
smudges on the scanned image and transfer the dirt to subsequent 
documents. Always clean the internal parts of the scanner after 
scanning such documents.

• When scanning a two-sided document that is printed on thin paper, 

the image on the opposite side of each page may show through. In 
this case, adjust the scanning intensity in the application software 
before scanning the document.

• It is recommended that thin documents are fed one sheet at a time.
• Scanning the following types of documents can cause a paper jam 

or malfunction. To scan such a document, make a photocopy of the 
document and then scan the photocopy.

Size: 

50 mm x 53.9 mm (1.97" x 2.12") or larger

Paper weight:  300 g/m

2

 (80 lb bond) 0.35 mm (0.0138") or less

Orientation: Vertical 

feeding 

only

If a stack of business cards cannot be fed properly, reduce the 
number of cards in the stack.

Feed rollers

There are creases or 
fold lines.

Carbon paper

There are curls.

The surface is coated.

There are tears.

Extremely thin document 
such as semi-transparent 
thin paper.

There are clips or 
staples.

Documents with excessive 
paper dust particles.