Check that the machine is connected to the
network using the proper cable, then restart the
machine. (See “Installing/Uninstalling Software,” in
the Starter Guide.)

Is the TCP/IP network properly set up?

Make sure the IP addresses are properly set up. If
the IP addresses are set using DHCP, BOOTP, or
RARP, make sure they are operating.

Is the computer that is printing properly set up?

Make sure the proper printer driver is installed.
(See “Installing/Uninstalling Software,” in the
Starter Guide.)

Make sure the correct machine is set as the output
destination for the computer that is printing in
[Printers and Faxes] or Print Manager.

Is the name of the file being printed too long?

Rename the file with a shorter name. Normally
LPR (or the Microsoft TCP/IP Printer, if you are
using Windows 2000/XP) sends jobs either under
the name of the application software used for
printing, or the file name. However, a job name
longer than 255 bytes cannot be sent to the
machine.