Canon imageclass mf6560 ユーザーズマニュアル
1
2
3
4
5
6
7
8
Back
4-4
Using the Remote UI
The Remote UI software enables you to access and manage
the machine connected to a network using a web browser.
the machine connected to a network using a web browser.
● Check the machine status from a network computer
● Set and control the machine from a computer
● Set and control the machine from a computer
■
Starting the Remote UI
NOTE
Before you start the Remote UI, select <VIEW IP ADDRESS> in
<NETWORK SETTINGS> located in the <SYSTEM SETTINGS>, and
verify the IP address of the machine. If you do not know the IP address,
consult with your network administrator. (See Chapter 3, “Network”.)
<NETWORK SETTINGS> located in the <SYSTEM SETTINGS>, and
verify the IP address of the machine. If you do not know the IP address,
consult with your network administrator. (See Chapter 3, “Network”.)
1.
Start the web browser.
2.
Enter the IP address of the machine in
[Address] or [Location]
[Address] or [Location]
→ press [Enter] on
the keyboard.
The Remote UI screen appears.
3.
Enter the password or the owner name.
For Administrator Mode: Enter the password.
For End-User Mode: Enter the owner name.
For End-User Mode: Enter the owner name.
NOTE
To specify or change password, click [System Settings] under
[Add. Func.]
[Add. Func.]
→ click [Edit] on the right side of the title of System
Manager Settings
→ click [Register Password] → select [Set
Password]
→ enter passwords in [System Manager Password]
and in [Confirm]
→ click [OK]. You can enter a password that
discriminates between lowercase and uppercase up to 7
characters. Note that you must logon with Administrator Mode
before specifying or changing password.
characters. Note that you must logon with Administrator Mode
before specifying or changing password.
4.
Click [OK].