Canon imageclass mf6560 ユーザーズマニュアル
1
2
3
4
5
6
7
8
Back
3-14
7.
Specify the TCP/IP protocol.
[Subnet]
If the computer on which NetSpot
Device Installer runs is connected to
more than one network, select the
subnet that the desired device belongs
to.
Device Installer runs is connected to
more than one network, select the
subnet that the desired device belongs
to.
[Product Type]
Select the product name of your
machine. If the product name of your
machine is not displayed, select
[imageCLASS MF6580/6560].
machine. If the product name of your
machine is not displayed, select
[imageCLASS MF6580/6560].
[Frame Type]
Select [Ethernet II].
[IP Address Settings with]
Select the method for setting the IP
address.
address.
[Manual Setting]:
You need to set the IP address manually.
The IP address that you enter in [IP
Address] is assigned to the network
board.
You need to set the IP address manually.
The IP address that you enter in [IP
Address] is assigned to the network
board.
[DHCP]:
The IP address is automatically
obtained via DHCP (a DHCP server
needs to be active on the network).
The IP address is automatically
obtained via DHCP (a DHCP server
needs to be active on the network).
[IP Address]
Enter the IP address assigned to the
network board.
network board.