Canon imageclass mf4150 ユーザーガイド
1
2
3
4
5
6
Back
2-4
■
2 on 1 Combination
2 on 1 combination automatically reduces two documents to fit
on LTR or A4 size paper. This feature can be used with both
“Collate Copy” (see p. 2-2) and “Two-Sided Copying” (see
p. 2-3) at the same time.
on LTR or A4 size paper. This feature can be used with both
“Collate Copy” (see p. 2-2) and “Two-Sided Copying” (see
p. 2-3) at the same time.
1.
Set documents.
Place the first page on the platen glass if you are not using the
ADF.
ADF.
2.
Press [COPY].
3.
Press [Collate/2 on 1].
4.
Use [
] or [
] to select <2 ON 1 >, then
press [OK].
If you want to use <2 ON 1> with “Collate Copy” (see p. 2-2) at
the same time, select <COLLATE+2 ON 1>, then press [OK].
the same time, select <COLLATE+2 ON 1>, then press [OK].
5.
Use the numeric keys to enter the desired
copy quantity (1 to 99).
copy quantity (1 to 99).
6.
Press [Start].
When you set the document on the platen glass, press [Start] for
each document. When scanning is complete, press [OK].
each document. When scanning is complete, press [OK].
NOTE
– If you press [OK] without scanning the second document, only
the first document will be printed on the left side of the paper.
– A maximum of 1/8" (4 mm) margin will be produced between
the two reduced documents in 2 on 1 combination copying.
– To cancel all settings, press [Stop/Reset].
2
1
1
2
Originals
Copy