Canon imageformula cr-190i ユーザーズマニュアル

9

The following computer system requirements are recommended for 
using the CR-190i.

• Microsoft Windows XP (32bit) SP3 or later
• Microsoft Windows XP (64bit) SP2 or later
• Microsoft Windows Vista (32/64bit) SP1 or later
• Microsoft Windows 7 (32/64bit)

• CPU: Intel Core2 Duo 3.0 GHz or faster
• Memory: 1 GB or more
• USB 2.0 interface

• Use the cable provided or a Hi-Speed USB 2.0 interface cable to 

connect to the computer’s USB port.

• If you use the USB interface that was provided as standard with 

your computer:
• Use the most recently available USB 2.0 driver provided by 

Microsoft. Contact your local authorized Canon dealer for more 
detailed information.

• Not all USB interfaces provided as standard with personal 

computers are guaranteed. Contact your local authorized Canon 
dealer for more detailed information.

• Scanning speeds are slower if your computer’s standard USB 

interface is USB 1.1.

• You should use the USB cable originally bundled with the scanner 

or a Hi-Speed USB 2.0 compatible cable.

• If the CPU, memory, interface card, and other specifications do not 

satisfy the installation requirements, the scanning speed may be 
greatly reduced and transmission may take longer.

• Even if the computer satisfies the recommended specifications, the 

scanning speed may vary, depending on the scan settings.

Follow the instructions below to install the Scanning Utility and the 
dedicated driver.

The dedicated scanner driver is installed after the Scanning Utility 
has been installed.

Be sure to log on as the Administrator.

This manual assumes that “D” is assigned to your CD-ROM drive.

The procedure in Windows XP/7 is different from the ones 
described in this manual. Refer to the Windows XP/7 “Help and 
Support Center” to select [Run].