Canon multipass c5500 ユーザーズマニュアル

Data from computer is 

The print head unit may need

Clean the print head. See

not printed (continued)

cleaning.

page 9-8.

The BJ cartridge may need to be Replace the BJ cartridge. See
replaced. (It may be out of ink.)

page 9-11.

The application you are 

Check the computer and the

printing from may not be 

application to make sure they 

set up properly.

are configured correctly.

Make sure your application has
the MultiPASS selected as the
printer.

The MultiPASS may not be set

Make sure the MultiPASS is

as the default printer or the

selected as the default or

selected printer.

current printer.

Make sure the MultiPASS Server
is running.

The printer driver may be 

Make sure the MultiPASS 

configured with the wrong

printer driver is configured

port.

to use the computer’s 
parallel port. See page 2-7.

The computer’s parallel port

Make sure your computer’s 

may be disabled.

CMOS has the primary 
parallel port set to LPT1.
(Your computer should have
a Setup Program that lets you 
do this.) See your computer’s
documentation.

Another hardware device or

Disconnect the peripheral

software application is 

device and uninstall or remove

attempting to communicate

any software associated with

with the same parallel port 

this device and any software

to which the MultiPASS is 

communicating with the 

connected.

parallel port.

BJ cartridge moves,

The BJ cartridge or a BJ tank 

Make sure the BJ cartridge

ink does not appear

may not be installed properly.

and its BJ tank(s) are properly
installed. Make sure the orange
tape is removed from the print
head area (see page 9-14).

The nozzles on the BJ

Perform the print head

cartridge may be clogged.

cleaning procedure (see page 
9-8) and print the nozzle check
(see page 9-7).

A BJ tank may be empty

Check the BJ tanks and

(BC-21e Color BJ cartridge).

replace them if necessary.

Chapter 10