Canon pixma mg3220 inkjet multifunction printer 6223b002 ユーザーズマニュアル
Troubleshooting
WPS
E > 2 > 1
The error appears when wireless connection setup was not completed within 2 minutes after pressing the WPS
button.
button.
Is the network device (router, etc.) turned on? If the network device is already turned on, turn it off, then turn it back
on.
on.
E > 2 > 3
The screen appears when multiple access points are detected. Wait for a while, then confi gure WPS settings again.
Press the WPS button on only one access point.
Press the WPS button on only one access point.
E > 2 > 4
The screen appears when an error occurs.
Check the access point settings, then confi gure WPS settings again.
Check the access point settings, then confi gure WPS settings again.
For details on how to check the settings of the access point, refer to the manual supplied with the access point or
contact its manufacturer.
contact its manufacturer.
To confi gure WPS settings again
1. Press the Color button (A).
2. Press and hold the Maintenance button on the printer (for about 5 seconds).
3. Make sure that the LED fl ashes as shown in the illustration above.
3. Make sure that the LED fl ashes as shown in the illustration above.
•