Canon pixma ip4300 ユーザーズマニュアル

Before Printing

z

Flatten the four corners of the paper before loading it.

Prepare to load paper.

(1) Open the Paper Support and pull out the Paper 

Support Extension to support the paper.

(2) Press the Open Button to open the Paper 

Output Tray. 

(3) Pull out the Paper Output Tray Extension 

completely.

(4) Press the Paper Feed Switch so that the Auto 

Sheet Feeder lamp (A) lights.

z

Align the edges of paper neatly before loading. Loading paper without aligning the edges may 

cause paper jams.

z

If paper is curled, hold the opposing curled corners and gently bend them in the opposite 

direction until the paper becomes completely flat. See “Paper is curled.” on page 68.

z

To avoid curling, handle paper as follows.

– Put unused paper back into the package and keep them on a level surface.

– Take out only the necessary number of sheets from the package, just before printing.

When closing the Paper Output Tray Extension after 

printing, lift it up slightly.

You can also select the paper source with the printer 

driver.
For details, refer to the Printer Driver Guide on-screen 

manual.

(1)

(2)

(3)

(4)

(A)