Canon PowerShot A530 ユーザーズマニュアル
92
Image is blurred or out of focus.
AF-assist Beam is set to
[Off].
[Off].
!
In dark places where it is difficult for
the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned off, set it [On] to
activate it
the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned off, set it [On] to
activate it
. Take care not to
obstruct the AF-assist Beam with
your hand when used.
your hand when used.
The camera moves when
the shutter button is
pressed.
the shutter button is
pressed.
!
Setting the self-timer to
(2 seconds) delays the shutter
release for 2 seconds after the
shutter button is pressed and
allows the camera to stop shaking,
thus preventing a blurred image
release for 2 seconds after the
shutter button is pressed and
allows the camera to stop shaking,
thus preventing a blurred image
.
Even better results can be
obtained by placing the camera on
a stable surface or by using a
tripod to shoot.
obtained by placing the camera on
a stable surface or by using a
tripod to shoot.
Subject is out of focal range. ! Shoot with the subject at the
correct shooting distance
The subject is hard to focus
on.
on.
!
Use the focus lock, AF lock or
manual focus to shoot
manual focus to shoot
Subject in recorded image is too dark.
Insufficient light for shooting. ! Set the flash to
(Flash on)
(Basic Guide p. 8).
The subject is
underexposed because the
surroundings are too bright.
underexposed because the
surroundings are too bright.
!
.
!
Use the spot metering function
.
Subject is too far away for
flash to reach.
flash to reach.
!
!
Raise the ISO speed and then
shoot
shoot
.