Samsung bn68-02924a-02 ユーザーズマニュアル
26
English
Advanced Features
Network Setup (Auto)
Use the Automatic Network Setup when connecting your
TV to a network that supports DHCP. To set up your TV’s
cable network connection automatically, follow these steps:
TV to a network that supports DHCP. To set up your TV’s
cable network connection automatically, follow these steps:
How to set up automatically
1. Connect your TV to your LAN as described in the
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, press the
MENU
button on your
remote, use the
▲ or ▼ button to select Setup, and
then press the
ENTER
E button.
3. Use the
▲ or ▼ button to select Network in the Setup
menu, and then press the
ENTER
E button. The
Network screen appears.
4. On the Network screen, select Network Type.
5. Set Network Type to Wired.
6. Select Network Setup. The Network Setup screen
5. Set Network Type to Wired.
6. Select Network Setup. The Network Setup screen
appears.
7. Set Internet Protocol Setup to Auto.
8. Auto acquires and enters the needed Internet values
8. Auto acquires and enters the needed Internet values
automatically.
9. Wait two minutes, and then press the
RETURN
button
on your remote.
10. If the Network Function has not acquired the network
connection values, go to the directions for Manual.
Network Setup (Manual)
Use the Manual Network Setup when connecting your TV to
a network that requires a Static IP address.
a network that requires a Static IP address.
Getting the Network Connection Values
To get the Network connection values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
To get the Network connection values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The
Network connection values are displayed.
How to set up manually
To set up your TV’s cable network connection manually,
follow these steps:
1. Follow Steps 1 through 6 in the “How to set up
To set up your TV’s cable network connection manually,
follow these steps:
1. Follow Steps 1 through 6 in the “How to set up
automatically” procedure.
2. Set Internet Protocol Setup to Manual.
3. Press the
3. Press the
▼ button on your remote to go to the first
entry field.
4. Enter the IP Address, Subnet Mask, Gateway, and
DNS Server values. Use the number buttons on your
remote to enter numbers and the arrow buttons to move
from one entry field to another.
remote to enter numbers and the arrow buttons to move
from one entry field to another.
5. When done, press the
RETURN
button on your remote.
6. Select Network Test to check the Internet connectivity.
Network Setup
IP Address
:
Subnet Mask
:
Gateway
:
DNS
: Auto
DNS Server
:
U Move E Enter R Return
Internet Protocol Setup
: Auto
►
Network
U Move E Enter R Return
Network Type
: Wired
►
Network Setup
Network Test
Network Test
SWL (Samsung Wireless Link)
: Off
SWL connect
[UC6900_USA]BN68-02924A-02Eng.indb 26
2010-06-04 오후 5:07:37