Samsung ak68-00411a ユーザーズマニュアル

TV (Normal, Widescreen, Projection, etc..)

DVD Player + TV with Video Input Jack
(The Video Output in Setup Menu must be set to the S-Video or Component(I-SCAN).)

DVD Player + TV with S-Video Input Jack 
(The Video Output in Setup Menu must be set to the S-Video.)

DVD Player + TV with interlace Scan Component Video Jacks 
(The Video Output in Setup Menu must be set to the Component(I-SCAN).)

Method 4
DVD Player + TV with Progressive Scan Component Video Jacks. 
(The Video Output in Setup Menu must be set to the Component(P-SCAN).)
• If you want to convert Video Output to the Progressive Scan, you have to first connect Video or S-Video on

your TV. Then select Component(P-SCAN)(480p) out of Video Output in Setup Menu. Within 10 seconds,
change the TV’s external input to 525p(480p or Component) and select “Yes” (See Page 31).

• If Component(P-SCAN) Video Output is selected in Setup Menu, Video(Composite) and S-Video will not work.

• Consult your TV User’s Manual to find out if your TV supports Progressive Scan. 

If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan 
settings in the TV’s menu system.

• Depending on your TV, the Method of connection may differ from the illustration above.

AV 

Cable

S-Video

Cable

Video

Cables

The following shows examples of connections commonly used to connect the DVD player with a TV
and other components. 

• Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.

• Refer to the owner’s manual of the additional components you are connecting for more information on those

particular components.