Samsung ak68-00411a ユーザーズマニュアル

Press the EZ VIEW button.

• The screen size changes when the button is

pressed repeatedly.

• The screen zoom mode operates differently

depending on the screen setting in the initial setup
menu.

• To ensure correct operation of the EZ VIEW

button, you should set the correct aspect ratio in
the initial setup (See page 30).

Wide Screen
Displays the content of the DVD title in 16:9
aspect ratio.

The top and bottom of the screen are cut off.
When playing a 2.35:1 aspect ratio disc, the
black bars at the top and bottom of the screen
will disappear. The picture will look vertically
stretched. (Depending on the type of disc, the
black bars may not disappear completely.)

The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.

Displays the content of the DVD title in 16:9
aspect ratio. The picture will look horizontally
stretched.

The top and bottom of the screen are cut off
and the full screen appears. 
The picture will look vertically stretched.

• Zoom Fit 

The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.

When a 4:3 DVD is viewed on a 16:9 TV, black
bars will appear at the left and right of the
screen in order to prevent the picture from 
looking horizontally stretched.

Displays the content of the DVD title in 16:9
aspect ratio. The black bars will appear at the
top and bottom of the screen.

The left and right of the screen are cut off and
displays the central portion of the 16:9 screen.

The top and bottom of the screen are cut off
and the full screen appears. 
The picture will look vertically stretched.

The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.

Displays the content of the DVD title in 4:3
aspect ratio.

The top and bottom of the screen are cut off
and the full screen appears. 
The picture would look vertically stretched.

• Zoom Fit 

The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.

• This function may behave differently depending on

the type of disc.

1. Press the PROG button.

2. Use the LEFT/RIGHT buttons to select

PROGRAM. Press the ENTER button.

3. Use the LEFT/RIGHT/UP/DOWN buttons to

select the first track to add to the program.
Press the ENTER button. The selection numbers
appear in the Program Order box.

4. Press the PLAY/PAUSE (       ) button. 

The disc will be played in programmed order.

1. Press the PROG button.

2. Use the LEFT/RIGHT buttons to select RANDOM.

Press the ENTER button. 

• Depending on the disc, the Program and Random

Play functions may not work.

• PROGRAM/RANDOM playback cannot be used if

the disc contains more than two types of file 
extensions.

• This unit can support a maximum of 20 

programmed tracks.

• While in playback mode, press the CLEAR button

on the remote control to cancel Programmed Play
or Random Play.

This feature allows you slowly to repeat
scenes containing sports, dancing, musical
instruments being played etc. so you can
study them more closely.

1. During play, press the PLAY/PAUSE (       ) 

button.

2. Press and hold the       button to choose the play

speed between 1/8, 1/4, and 1/2 of normal during
PAUSE or STEP mode.

3. Press the REPEAT button on the remote. 

Repeat screen appears.

4. Select A-B using the LEFT/RIGHT buttons.

5. Press the ENTER button to select the point

where the function starts. (A)

6. Press the ENTER button to select the point

where the function ends. (B)

7. To return to normal play, press REPEAT again,

then press the LEFT/RIGHT buttons to select Off
and press ENTER.

* REPEAT A-B button (DVD-P148 only)
• Press the REPEAT A-B button to select the point where

the function starts. (A)

• Press the REPEAT A-B button to select the point where

the function ends. (B)

• To terminate the function, press the 'CLEAR' button or

the 'REPEAT A-B' button again.

• The disc will play from A to B repeatedly at the

speed you chose.

• To terminate the function, press the CLEAR 

button.

• A-B REPEAT does not allow you to set point (B)

until at least 5 seconds has elapsed after point (A)
has been set.

• When in VCD 2.0 mode (MENU ON mode), this

function does not work. (See page 13)