Sony AVD-S10 ユーザーズマニュアル
50
GB
Adjusting the level
parameters
parameters
The level menu contains parameters that let
you adjust the balance and speaker volumes
of each speaker (page 26).
you adjust the balance and speaker volumes
of each speaker (page 26).
1
Start playing a programme source
encoded with multichannel
surround sound.
encoded with multichannel
surround sound.
2
Press AMP MENU repeatedly.
9 LEVEL appears on the front panel
display.
display.
3
Sit in your listening position and
select the item to be adjusted
using X/x.
select the item to be adjusted
using X/x.
4
Adjust the volume level using C/c.
The adjusted value will appear on the
front panel display. If you do not operate
the remote for a few seconds, the value
turns off and is stored in the receiver.
front panel display. If you do not operate
the remote for a few seconds, the value
turns off and is stored in the receiver.
ENTER
C
/
X
/
x
/
c
AMP MENU
Using only the front
speakers
speakers
(2 Channel Stereo)
Press SOUND FIELD +/– repeatedly
until “2CH STEREO” appears on the
front panel display.
until “2CH STEREO” appears on the
front panel display.
This mode outputs the sound from the front
left and right speakers only. Standard 2
channel (stereo) sources completely bypass
the sound field processing. Multi channel
surround formats are downmixed to 2
channel.
left and right speakers only. Standard 2
channel (stereo) sources completely bypass
the sound field processing. Multi channel
surround formats are downmixed to 2
channel.
Note
No sound is output from the sub woofer when “2CH
STEREO” is selected. To listen to 2 channel (stereo)
sources using the front left and right speakers and a
sub woofer, press SOUND FIELD +/– repeatedly to
select “A.F.D.”
STEREO” is selected. To listen to 2 channel (stereo)
sources using the front left and right speakers and a
sub woofer, press SOUND FIELD +/– repeatedly to
select “A.F.D.”
SOUND
FIELD +/–
FIELD +/–