Sony 3-286-590-12(1) ユーザーズマニュアル
98
Troubleshooting
If indicators appear in the viewfinder or on
the LCD screen, check the following.
the LCD screen, check the following.
If the problem persists even after you have
tried to fix a couple of times, contact your
Sony dealer or local authorized Sony service
facility.
tried to fix a couple of times, contact your
Sony dealer or local authorized Sony service
facility.
C:(or E:) ss:ss (Self-diagnosis
display)
display)
C:04:ss
• The battery pack is not an
• Connect the DC plug of the AC
C:13:ss / C:32:ss
• Remove the power source. Reconnect it
and operate your camcorder again.
E:20:ss / E:31:ss / E:61:ss /
E:62:ss / E:91:ss / E:94:ss
E:62:ss / E:91:ss / E:94:ss
• A malfunction that you cannot service
has occurred. Contact your Sony dealer
or local authorized Sony service
facility. Inform them of the 5-digit
code, which starts from “E”.
or local authorized Sony service
facility. Inform them of the 5-digit
code, which starts from “E”.
101-0001 (Warning indicator
pertaining to files)
pertaining to files)
Slow flashing
• The file is damaged.
• The file is unreadable.
• The file is unreadable.
(Warning on the hard disk of the
camcorder)*
Fast flashing
• An error may have occurred with the
hard disk drive in your camcorder.
(Warning on the hard disk of the
camcorder)*
Fast flashing
• The hard disk of the camcorder is full.
• An error may have occurred with the
• An error may have occurred with the
hard disk drive in your camcorder.
E
(Battery level warning)
Slow flashing
• The battery pack is nearly used up.
• Depending on the operating
• Depending on the operating
environment or battery conditions, E
may flash, even if there are
approximately 20 minutes remaining.
may flash, even if there are
approximately 20 minutes remaining.
(High temperature warning)
Slow flashing
• The temperature of your camcorder is
getting higher. Turn off your camcorder
and leave it for a while in a cool place.
and leave it for a while in a cool place.
Fast flashing
*
• The temperature of your camcorder is
extremely high. Turn off your
camcorder and leave it for a while in a
cool place.
camcorder and leave it for a while in a
cool place.
(Low temperature warning)*
Fast flashing
• The temperature of your camcorder is
extremely low. Make the camcorder
warm.
warm.
Self-diagnosis display/Warning
indicators
indicators
C:04:00