Sony CDX-M7850 ユーザーズマニュアル
11
CDX-M7850
2-586-657-21 (1)
H:\Data Disk\2586657211\258665721CDXM7850EUR\01GB02CD-EUR.fm
masterpage:Right
H:\Data Disk\2586657211\258665721CDXM7850EUR\01GB02CD-EUR.fm
masterpage:Right
Other functions
Changing the sound settings
Adjusting the sound
characteristics
characteristics
You can adjust the equalizer, DSO, bass, treble,
balance, fader and subwoofer volume.
balance, fader and subwoofer volume.
1
Select a source, then press
(SOUND)
repeatedly to select the desired item.
The item changes as follows:
EQ7
t
DSO
t
BAS
(bass)
t
TRE
(treble)
t
BAL
(left-right)
t
FAD
(front-rear)
t
SUB
(subwoofer volume)*
*
“
∞
” is displayed at the lowest setting, and can be
adjusted up to 20 steps.
2
Rotate the VOL control dial repeatedly
to adjust the selected item.
to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
Adjust within 3 seconds of selecting the item.
With the card remote commander
In step 2: press
In step 2: press
<
or
,
instead of the VOL control
dial.
Adjusting the equalizer curve
— EQ7 Tune
You can adjust and store the equalizer settings
for different tone ranges.
for different tone ranges.
1
Select a source, then press
(MENU)
.
2
Rotate the SEEK control dial until
“Sound” appears, then press
“Sound” appears, then press
(ENTER)
.
3
Rotate the SEEK control dial until
“EQ7 Tune” appears, then press
“EQ7 Tune” appears, then press
(ENTER)
.
4
Rotate the SEEK control dial to select
the desired equalizer type, then press
the desired equalizer type, then press
(ENTER)
.
5
Rotate the SEEK control dial to adjust
the desired volume level.
the desired volume level.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
from –10 dB to +10 dB.
6
Press
(ENTER)
to move to the next
frequency.
The frequency changes as follows:
62Hz
t
157Hz
t
396Hz
t
1.0kHz
t
2.5kHz
t
6.3kHz
t
16kHz
Repeat steps 5 and 6 to adjust the equalizer
curve.
The confirmation dialog appears after
adjusting “16kHz” and pressing (ENTER).
curve.
The confirmation dialog appears after
adjusting “16kHz” and pressing (ENTER).
7
Rotate the SEEK control dial to select
“YES,” then press
“YES,” then press
(ENTER)
.
The setting is complete and the display
returns to normal play/reception mode.
returns to normal play/reception mode.
To restore the factory-set equalizer curve, press
and hold (ENTER) in step 5 or 6, then rotate the
SEEK control dial to select “YES.”
and hold (ENTER) in step 5 or 6, then rotate the
SEEK control dial to select “YES.”
With the card remote commander
In steps 2, 3 and 5: press
In steps 2, 3 and 5: press
M
or
m
instead of the SEEK
control dial; in steps 4 and 7: press
<
or
,
instead
of the SEEK control dial; in step 6: press
<
or
,
instead of
(ENTER)
.
Adjusting menu items — MENU
1
Press
(MENU)
.
2
Rotate the SEEK control dial until the
desired menu item appears, then
press
desired menu item appears, then
press
(ENTER)
.
The items changes as follows:
Setup
y
Display
y
Receive Mode
y
Sound
y
Edit
y
List
3
Rotate the SEEK control dial until
desired setting item appears, then
press
desired setting item appears, then
press
(ENTER)
.
The digital indication moves to the right
(setting selection) side.
(setting selection) side.
4
Rotate the SEEK control dial to select
the setting, then press
the setting, then press
(ENTER)
.
The setting is complete.
5
Press
(MENU)
.
The display returns to normal play/reception
mode.
mode.
Note
Displayed items will differ, depending on the source
and setting.
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In steps 2 and 3: press
In steps 2 and 3: press
M
or
m
instead of the SEEK
control dial; in step 4, press
<
or
,
instead of the
SEEK control dial.
continue to next page
t