Sony CPD-E210 ユーザーズマニュアル

ページ / 16
15
D:\###sagyou\02 gatu\0203-ya\874120S CPD-E210\01US03BAS-UC.fm
masterpage:Right
CPD-E210
4-077-098-11 (1)
* If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result. A humming noise may be heard, but this is not a 
malfunction.
Displaying this monitor’s name, serial number, 
and date of manufacture.
While the monitor is receiving a video signal, press and hold the 
center of the control button for more than five seconds to display 
this monitor’s information box.
If the problem persists, call your authorized Sony dealer and give 
the following information.
• Model name: CPD-E210
• Serial number
• Name and specifications of your computer and graphics board.
Edges of the image are curved
• Adjust the geometry (page 10).
Wavy or elliptical pattern (moire) 
is visible
• Select MOIRE ADJUST and adjust the moire cancellation effect (page 11).
x
Problems caused by the connected computer or other equipment
• Change your desktop pattern.
Color is not uniform
• Degauss the monitor* (page 11). If you place equipment that generates a magnetic field, 
such as a speaker, near the monitor, or if you change the direction the monitor faces, color 
may lose uniformity.
White does not look white
• Adjust the color temperature (page 10).
Letters and lines show red or blue 
shadows at the edges
• Adjust the convergence (page 10).
Monitor buttons do not operate
• If the control lock is set to ON, set it to OFF (page 11).
A hum is heard right after the 
power is turned on
• This is the sound of the auto-degauss cycle. When the power is turned on, the monitor is 
automatically degaussed for five seconds.
Symptom
Check these items
MENU
MODE L : CPD - E 2 1 0
SER NO : 1 2 3 4 5 6 7
MANUF ACTURED : 2 0 0
I NFORMA T I ON
0 - 1 5
Example
b
01US01COV-UC.book  Page 15  Thursday, February 3, 2000  4:06 PM