Sony cmt-sd1 ユーザーズマニュアル
7
Getting Started
Step 3: Presetting
radio stations
radio stations
You can preset the following number of
stations:
stations:
– 20 for FM, 10 for AM.
To change the time
You can change the preset time while the
power is on.
power is on.
1 Press TIMER SET.
2 Press +/– repeatedly until “CLOCK SET”
2 Press +/– repeatedly until “CLOCK SET”
appears then press ENTER.
3 Repeat steps 2 and 3.
Tips
• If you have made a mistake, start again from step
1.
• The built-in clock shows the time in the display
while the power is off. However, the clock is not
displayed in the Power Saving Mode (see page 8).
displayed in the Power Saving Mode (see page 8).
• The upper dot flashes for the first half of a minute
(0 to 29 seconds), and the lower dot flashes for the
last half of a minute (30 to 59 seconds).
last half of a minute (30 to 59 seconds).
continued
1
3
3
5,6
5
2
4,5
6
n
1
Press
1/u to turn on the power.
2
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
until the band you want appears in
the display.
Each time you press the button, the band
changes as follows:
changes as follows:
FM n AM
3
Press TUNING MODE repeatedly
until “AUTO” appears.
until “AUTO” appears.
4
Press +/–.
The frequency indication changes and
scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a stereo programme) appear. When you
want to stop scanning, press
TUNING MODE.
scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a stereo programme) appear. When you
want to stop scanning, press
TUNING MODE.