Sony dav-hdz485 ユーザーズマニュアル
66
US
2
Press
X/x repeatedly until “S-AIR
MODE” appears in the front panel
display, then press
display, then press
or
c.
Note
• When the wireless transmitter is not inserted in
the unit, “S-AIR MODE” cannot be selected.
3
Press
X/x to select the desired setting.
• “PARTY”: The S-AIR receiver outputs
sound according to functions set on the
unit.
unit.
• “SEPARATE”: You can set the desired
function for the S-AIR receiver while unit
functions do not change.
functions do not change.
4
Press .
The setting is made.
5
Press SYSTEM MENU.
The system menu turns off.
6
Select the desired function on the
S-AIR receiver.
S-AIR receiver.
x When “PARTY” is set
The S-AIR receiver’s function changes
sequentially as you press FUNCTION +/–
of the main unit (page 29) or S-AIR CH of
the S-AIR receiver.
sequentially as you press FUNCTION +/–
of the main unit (page 29) or S-AIR CH of
the S-AIR receiver.
x When “SEPARATE” is set
The S-AIR receiver’s function changes
by pressing S-AIR CH of the S-AIR
receiver as follows.
by pressing S-AIR CH of the S-AIR
receiver as follows.
“MAIN UNIT”
t “TUNER FM” t
“DMPORT”
t “AUDIO” t …
To enjoy the same function as the unit,
select “MAIN UNIT.”
select “MAIN UNIT.”
7
Adjust the volume on the S-AIR
receiver.
receiver.
Note
• When the sound is other than 2 channel stereo, multi-
channel sound is downmixed to 2 channel.
To set “S-AIR MODE” via the
remote
remote
Press S-AIR MODE.
The S-AIR mode appears in the front panel
display. Each time you press S-AIR MODE, the
S-AIR mode changes.
display. Each time you press S-AIR MODE, the
S-AIR mode changes.
To control the system from the
S-AIR receiver
S-AIR receiver
You can control the system from the S-AIR
receiver by using the following buttons.
receiver by using the following buttons.
For details, refer to the operating instructions of
the S-AIR receiver.
the S-AIR receiver.
You can enjoy the S-AIR receiver while the unit
is in standby mode by setting “S-AIR STBY” to
“STBY ON.”
is in standby mode by setting “S-AIR STBY” to
“STBY ON.”
1
Press SYSTEM MENU.
2
Press
X/x repeatedly until “S-AIR
STBY” appears in the front panel
display, then press
display, then press
or
c.
Note
• When the wireless transmitter is not inserted in
the unit, “S-AIR STBY” cannot be selected.
3
Press
X/x to select the desired setting.
• “STBY ON”: You can enjoy the S-AIR
receiver while the unit is in standby mode
or turned on. The power consumption
during the standby mode increases.
or turned on. The power consumption
during the standby mode increases.
• “STBY OFF”: You cannot enjoy the
S-AIR receiver while the unit is in
standby mode.
standby mode.
The default setting differs depending on the
area.
area.
4
Press .
The setting is made.
5
Press SYSTEM MENU.
The system menu turns off.
Press
Operation
H, X, x,
./>
./>
Share the same operations on the
remote and unit.
remote and unit.
S-AIR CH
Change the function of the system.
Enjoying the S-AIR receiver
while the unit is in standby
mode
while the unit is in standby
mode
For the S-AIR receiver