Sony DCR-PC350E ユーザーズマニュアル
Recording
44
5
Press REC START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
disappears when the fade is complete.
To cancel the operation
Follow steps 2 and 3, then select [OFF] in step
4.
4.
b
Note
• You cannot use the FADER function together with:
– Self-timer
– Super NightShot function
– Color Slow Shutter function
– Digital effect
– [FRAME REC] (Frame recording)
– [SMTH INT. REC] (Smooth interval tape
– Super NightShot function
– Color Slow Shutter function
– Digital effect
– [FRAME REC] (Frame recording)
– [SMTH INT. REC] (Smooth interval tape
recording)
Fading in from still image on the
“Memory Stick Duo” – Memory overlap
“Memory Stick Duo” – Memory overlap
You can fade in from the still image on the
“Memory Stick Duo” to the movie currently
being recorded on the tape.
“Memory Stick Duo” to the movie currently
being recorded on the tape.
1
Check that you have a “Memory Stick
Duo” with the still image to be
superimposed and a tape in your
camcorder.
Duo” with the still image to be
superimposed and a tape in your
camcorder.
2
Slide the POWER switch to select the
CAMERA-TAPE mode.
CAMERA-TAPE mode.
3
Touch .
4
Touch
[
MENU].
5
Select
(PICT. APPLI.), then
[
OVERLAP] by touching
/
and
.
The recorded image appears on the
thumbnail screen.
thumbnail screen.
6
Touch
(previous)/
(next) to
select the still image to be superimposed.
7
Touch [ON], then
.
8
Touch .
9
Press REC START/STOP to start
recording.
[M. OVRLAP] stops flashing, and
disappears when fading is finished.
recording.
[M. OVRLAP] stops flashing, and
disappears when fading is finished.
Using special effects
– Digital
effect
You can add digital effects to the recordings.
[CINEMA EFECT] (Cinematic Effect)
You can add a cinematic atmosphere to pictures
by adjusting to a 16:9 screen and progressive
picture.
by adjusting to a 16:9 screen and progressive
picture.
[DELAY MOTION] (Delayed Motion
Effect)
Effect)
You can record a movie with a repeat effect.
[STILL]
You can record a movie while superimposing it
on a previously recorded still image.
on a previously recorded still image.
[FLASH] (Flash Motion)
You can record a movie with a serial-still-image
effect (strobe effect).
effect (strobe effect).
[LUMI. KEY] (Luminance Key)
You can replace a brighter area in a previously
recorded still image, such as the background of
a person or a title written on white paper, with a
movie.
recorded still image, such as the background of
a person or a title written on white paper, with a
movie.
0:00:00
STBY
P-MENU
60min
FADER
MOSAIC
Still image
Movie