Sony DHC-NX5MD ユーザーズマニュアル
66
Timer-recording radio
programmes (continued)
programmes (continued)
Connecting optional
components
components
Connecting optional A/V
components
components
To enhance your system, you can connect optional
components. Refer to the operating instructions of
each component.
components. Refer to the operating instructions of
each component.
Connecting audio components
Connecting a tape deck for
analogue recording
analogue recording
You can connect a tape deck to the system with
commercially available audio cords. Be sure to
match the colour-coded pins to the appropriate
jacks.
commercially available audio cords. Be sure to
match the colour-coded pins to the appropriate
jacks.
To the audio output
on the tape deck
on the tape deck
To the audio input on
the tape deck
the tape deck
To check the setting
1 Press TIMER SELECT.
2 Press
2 Press
V or v to select “SEL MD REC”, then
press ENTER.
To cancel the timer
Press TIMER SELECT and press
V or v to select
“TIMER OFF”, then press ENTER.
Notes
• If the system is on at the preset time, the recording
will not be made.
• The volume is reduced to minimum during
recording.
• You cannot activate DAILY 1 and DAILY 2 at the
same time.
• When you use the recording timer at the same time
as the Sleep Timer, the Sleep Timer setting has
priority.
priority.
• Do not operate the system from the time the system
turns on until the recording starts (about 30 seconds
before the preset time).
before the preset time).