Sony DVP-NS755V ユーザーズマニュアル

ページ / 96
82
• SUBWOOFER
Notes
• The cut off frequency for the subwoofer is fixed at 
120 Hz.
• If your speakers are too small to reproduce low 
bass frequencies, utilize a subwoofer for low 
frequency sound. When you set all speaker 
settings to “SMALL,” the bass redirection 
circuitry will be activated and the bass 
frequencies are output from the subwoofer.
• Even if there are fewer than 6 speakers connected, 
the player distributes the audio signal components 
to the front speakers.
◆ DISTANCE
Sets the distance from your listening position 
to the speakers. 
Set the distance to your front speakers in 
“FRONT” first (C). Values in “CENTER” 
(center speaker) and “REAR” (rear speaker) 
will automatically change to the same value 
(D and E). Adjust these values to reflect the 
actual distance to your center and rear 
speakers.
Be sure to change the value in the Setup 
Display when you move the speakers. 
The default adjustments are in parentheses.
For DVP-NS755V
For DVP-NS915V
Notes
• If each of the front or rear speakers are not placed 
at an equal distance from your listening position, 
set the distance according to the closest speaker.
• Do not place the rear speakers farther away from 
your listening position than the front speakers.
• These settings do not affect the Super Audio CD 
Multi audio signals.
NONE
Select this if you do not connect 
a subwoofer.
YES
Select this if you connect a 
subwoofer to output the LFE 
(low frequency effect) signals 
from the subwoofer.
(4~50 ft/
1~15 m)
(4~50 ft/
1~15 m)
FRONT 
(10 ft)
Set this between 4 and 50 feet in 
1 foot increments.
CENTER 
(10 ft)
Set this within –5 and +2 feet of 
the “FRONT” setting in 1 foot 
increments. For example, if 
“FRONT” is set to 6 feet, 
“CENTER” can be set between 
1 and 8 feet.
REAR (10 ft)
Set this between the “FRONT” 
setting and –16 feet in 1 foot 
increments. For example, if 
“FRONT” is set to 17 feet, 
“REAR” can be set between 1 
and 17 feet.
FRONT 
(3 m)
Set this between 1 and 15 
meters in 0.2 meter increments.
CENTER 
(3 m)
Set this within –1.6 and +0.6 
meters of the “FRONT” setting 
in 0.2 meter increments. For 
example, if “FRONT” is set to 6 
meters, “CENTER” can be set 
between 4.4 and 6.6 meters.
REAR (3 m)
Set this between the “FRONT” 
setting and –5 meters in 0.2 
meter increments. For example, 
if “FRONT” is set to 6 meters, 
“REAR” can be set between 1 
and 6 meters.