Sony har-lh500 ユーザーズマニュアル
Recording to HDD
13
Resume recording after
recording pause*
recording pause*
X or H (or the PLAY/
NEXT/PREV dial (H)
on the recorder)
NEXT/PREV dial (H)
on the recorder)
Sound source
Press
The CD in the recorder
CD
The component connected
to the DIGITAL
OPTICAL IN connector
to the DIGITAL
OPTICAL IN connector
OPTICAL
The component connected
to the ANALOG IN jacks
to the ANALOG IN jacks
ANALOG
Recording to the HDD
1
Turn on the amplifier and set the
source selector to the position for this
recorder.
source selector to the position for this
recorder.
2
Press
@
/
1
to turn on the recorder.
3
Press the respective button on the
remote to select the sound source.
remote to select the sound source.
4
Press
z
.
“REC” appears in the display.
The HDD stands by for recording.
To change the album position, press
ALBUM +/– (or turn the ALBUM dial on
the recorder) repeatedly. To enter the
position directly, press ALBUM and the
numeric button(s) (see page 19).
ALBUM +/– (or turn the ALBUM dial on
the recorder) repeatedly. To enter the
position directly, press ALBUM and the
numeric button(s) (see page 19).
When recording through the ANALOG IN
jack, adjust the recording level (see
“Adjusting the recording level” on page 17)
if necessary.
jack, adjust the recording level (see
“Adjusting the recording level” on page 17)
if necessary.
5
Press
H
(or the PLAY/NEXT/PREV dial
(
H
) on the recorder) or
X
.
Recording starts.
6
Start playing the sound source.
Other operations during recording
To
Press
Stop recording
x
Pause recording
X
Add a track number
z
* Track number increases by one.
Using the HDD display
You can check information about the HDD
using the display while recording.
using the display while recording.
To display time information while
recording
Press TIME repeatedly.
Each time you press the button, the display
changes as follows:
changes as follows:
Track number and elapsed time of the
current track
current track
t Percentage of the HDD area
used as the total recorded time
Notes
• The total recorded time is first displayed as a
percentage. When the remaining recordable time
reaches “999. 59” (999 minutes and 59 seconds),
the display changes to a time display.
reaches “999. 59” (999 minutes and 59 seconds),
the display changes to a time display.
• The percentage of the HDD area used will never be
0% even when no tracks have been recorded to the
HDD.
HDD.
Tip
“Analog In” appears in the display when you record
through the ANALOG IN jack, and “Optical In”
appears when you record through the DIGITAL
OPTICAL IN connector.
through the ANALOG IN jack, and “Optical In”
appears when you record through the DIGITAL
OPTICAL IN connector.
continued