Sony HT-SS1000 ユーザーズマニュアル

ページ / 60
56
GB
C:\Documents and 
Settings\pc13\Desktop\JC060000_2661769142SF1000_GB\2661769142\GB06OTH_HT-SF1000-
CEL.fm
masterpage: Left
model name1[HT-SF1000] 
model name2[HT-SS1000]
2-661-769-14
 (2)
Remote control
The remote does not function.
• For receiver operation, you can only use 
the DISPLAY button when the TUNER 
input is selected.
b)
• Point the remote at the remote sensor on 
the receiver.
• Remove any obstacles in the path between 
the remote and the receiver.
• Replace all the batteries in the remote with 
new ones, if they are weak.
• Make sure you select the correct input on 
the remote.
 
a)
Except for  models of area code MX, E51, AR.
b)
Models of area code CEL, CEK only.
Error messages
If there is a malfunction, the display shows a 
message. You can check the condition of the 
system by the message. Refer to the following 
table to solve the problem. If any problem 
persists, consult your nearest Sony dealer.
If an error message appears while you perform 
Auto Calibration, see “Error and warning 
codes” (page 25) t
o solve the problem.
PROTECT
Irregular current is output from the 
speakers. The receiver will automatically 
turn off after a few seconds. Check the 
speaker connection and turn on the power 
again.
If you are unable to remedy the 
problem using the 
troubleshooting guide
Clearing the receiver’s memory may remedy 
the problem (page 22). However, note that all 
memorized settings will be reset to their 
factory settings and you will have to readjust 
all settings on the receiver.
If the problem persist
Consult your nearest Sony dealer.
Reference sections for clearing 
the receiver’s memory
To clear
See
All memorized settings
Customized sound fields
GB01COV_HT-SF1000-CEL.book  Page 56  Thursday, August 24, 2006  8:27 AM