Sony HT-SF1300 ユーザーズマニュアル

ページ / 72
12
GB
Before you install the speaker and subwoofer, 
be sure to attach the supplied foot pads to 
prevent vibration or movement as shown in the 
illustration below.
Example of HT-SS1300 front 
speaker
HT-SF1300 only
You need to attach the supplied foot pads to 
the center speaker and subwoofer only.
HT-SS1300 only
You need to attach the supplied foot pads to all 
the speakers and subwoofer.
HT-SS1300 only
For greater flexibility in positioning the 
speakers, use the optional WS-FV11 or
 
WS-FV10D speaker stand (available only in 
certain countries). For details, refer to 
operating instructions supplied with the 
speaker stand.
HT-SF1300 only
For greater flexibility in positioning the 
speakers, use the supplied speaker stand. For 
details, refer to supplied speaker stand 
installation guide.
You can install your speakers on the wall.
1
Prepare screws (not supplied) 
that are suitable for the hook on 
the back of each speaker. See 
the illustrations below.
2
Fasten the screws to the wall. 
The screws should protrude 5 
to 7 mm.
Installing the speakers on a flat 
surface
Installing the speakers on the 
speaker stand
Installing the speakers on the 
wall
4 mm
more than 25 mm
Hook on the back of the speaker
4.6 mm
10 mm
5 to 7 mm