Sony HT-DDW5500 ユーザーズマニュアル
36
GB
* “SA-CD/CD/CD-R” scroll across the
display, then “SA-CD/CD” appears.
2
Turn on the component and
start playback.
start playback.
3
Press MASTER VOL +/– to
adjust the volume.
adjust the volume.
You can also use MASTER VOLUME on
the receiver.
the receiver.
To activate the muting function
Press MUTING.
The muting function will be canceled when
you do the following.
• Press MUTING again.
• Increase the MASTER VOLUME.
• Turn off the receiver.
The muting function will be canceled when
you do the following.
• Press MUTING again.
• Increase the MASTER VOLUME.
• Turn off the receiver.
To avoid damaging your
speakers
speakers
Before you turn off the receiver, be sure to turn
down the volume level.
down the volume level.
To listen to the subwoofers
• You can use the SUBWOOFER VOLUME
on the power amplifier to adjust the volume
of the subwoofers.
of the subwoofers.
• Set the volume level to suit your preference
according to the selected input as slight
adjustments may enhance the sound.
adjustments may enhance the sound.
• If you set the subwoofer volume to
maximum, extraneous noise may be heard
depending on the source you are playing.
depending on the source you are playing.
You can enter a name of up to 8 characters for
inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with
the names of the connected components.
inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press the input button to select
the input you want to create an
index name for.
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
the receiver.
2
Press AMP MENU.
“1-LEVEL” appears on the display.
3
Press
V/v repeatedly to select
“7-SYSTEM”.
4
Press
or
b to enter the
menu.
5
Press
V/v repeatedly to select
“NAME IN”.
6
Press
or
b to enter the
parameter.
The cursor flashes and you can select a
character.
character.
7
Press
V/v to select a character,
then press
B/b to move the
cursor to the next position.
If you made a mistake
Press
Press
B/b until the character you want to
change flashes, then press
V/v to select
the correct character.
Tips
• You can select the character type as follows
by pressing
V/v.
Alphabet (upper case)
t Numbers t
Symbols
• To enter a blank space, press
b without
selecting a character.
8
Press .
The name you entered is registered.
Selected input
[Display]
[Display]
Components that can
be played back
be played back
DVD
[DVD]
DVD player, etc.,
connected to DVD jack
connected to DVD jack
SAT
[SAT]
Satellite tuner, etc.,
connected to the SAT jack
connected to the SAT jack
TV
[TV]
TV, etc. connected to TV
jack
jack
SA-CD/CD
[SA-CD/CD/
CD-R]*
Super Audio CD/CD
player, etc., connected to
the SA-CD/CD/CD-R jack
player, etc., connected to
the SA-CD/CD/CD-R jack
TUNER
[FM or AM band]
Built-in radio tuner
Naming inputs