Sony KV-27FS16 ユーザーズマニュアル

Operating Instructions

If, after reading these Operating Instructions, you have additional questions related to the use of your
Sony television, please call our Direct Response Center at 1-800-222-SONY (7669) (U.S. residents
only) or (416) 499-SONY (7669) (Canadian residents only).

There is no
window picture
or it is just
static

Be sure your window picture is set to a video source/

channel that has a program airing.

You may be tuned to a video input with nothing

connected to it. Try cycling through your video inputs
using the yellow PIP TV/VIDEO button with the red
dot (page 18).

PIP is not set to receive a signal from the AUX input. If

you have connected a VCR, DVD or Satellite Receiver
to the AUX input on the TV, it will not show in the
small window picture.

I get the same
program in the
window picture
as in the main
picture

Both may be set to the same channel. Try changing

channels in either the main picture or the window
picture (pages 18-19).

Your TV may be set up to select all your channels

through a cable box. The cable box will only
unscramble one signal at a time, so you cannot use the
PIP feature. If possible, run a direct cable to the VHF/
UHF jack on your TV. This will only work if your cable
system provides an unscrambled signal (page 5).

You lost your
remote control

You can use the front Audio/Video panel controls to

access the menu. Press

to open the menu. Use the

buttons on the front Audio/Video panel

instead of the

F or

buttons on the remote control.

Use the

button on the front Audio/Video panel

instead of the

G, g

, and

buttons on the remote

control. Press

again when the setting or

adjustment is complete. Contact your nearest Sony
dealer to order a replacement.