Sony MHC-WZ50 ユーザーズマニュアル
18
GB
You can record just the portions you like from a
CD, tape or radio program on a tape.
You can also record from connected
components (see “Hooking up optional
components” on page 25).
Use buttons on the CD player for the operation.
CD, tape or radio program on a tape.
You can also record from connected
components (see “Hooking up optional
components” on page 25).
Use buttons on the CD player for the operation.
1
Load a recordable tape into deck B.
2
Press TAPE A/B to select deck B, then
press
press
nN
repeatedly to select
recording side. And press
x
to stop
playback.
3
Press CD, TAPE A/B or TUNER/BAND
to select the desired source to record.
to select the desired source to record.
• CD: To record from this system’s CD
player.
• TAPE: To record from this system’s tape
deck A.
• TUNER: To record from this system’s
tuner.
• MD or VIDEO: To record from the
optional component connected to the MD
(VIDEO) IN jacks.
(VIDEO) IN jacks.
4
Press
z
START.
Deck B stands by for recording.
“REC” flashes.
5
Press PLAY MODE/DIRECTION
repeatedly to select “
repeatedly to select “
g
” to record on
one side. Select “
j
” (or “RELAY”) to
record on both sides.
6
Press
z
START, then start playing the
desired source to record.
Recording starts.
Other operations
Notes
• You cannot listen to other sources while recording.
• If TAPE B is selected in step 3, silence is recorded.
Tips
• For recording from the radio:
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
move the respective antenna to reduce the noise.
• When you record on both sides, be sure to start from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
recording stops at the end of the reverse side.
Recording on a tape
manually
manually
— Manual Recording
To
Do this
Stop recording
Press x.
Pause recording
Press
z
START. Press again to
resume recording.