Sony mpk-dvf4 ユーザーズマニュアル

GB

Preparations

1

Preparing your camcorder

Before installing your camcorder in the marine pack, prepare the camcorder according
to this chapter. The DCR-TRV30E is the model used for illustration purposes.
Otherwise, the model name is indicated in the illustrations. Any differences in
procedure are clearly indicated in the text, for example, “for DCR-TRV30E.”
The procedure may be different depending on your camcorder type.
For details, please refer to the operating instructions supplied with your camcorder.

1

Remove the lens cap, shoulder strap,
conversion lens, filter or lenshood from
the camcorder.

2

Attach a charged battery pack.

3

Insert a cassette tape.

4

Attach the reflex prevention ring to the lens.

for DCR-TRV9E/TRV20E/TRV30E

: ø 37 mm (large)

for DCR-TRV6E/TRV8E/TRV10E/TRV11E/TRV15E/
TRV17E

: ø 30 mm (small)

for DCR-TRV890E/TRV900E

: not necessary

Be sure not too tighten prevention ring.

5

Select the camera mounting shoe.

The camera mounting shoe and the installing position of the screw plate differ on
your camcorder. For details, refer to the table below.

Camera
mounting
shoe

B

D

Position
of the
screw
plate

1

2

3

1

2

3

Camcorder

DCR-TRV9E

DCR-TRV6E/TRV11E/
TRV15E/TRV17E/
TRV20E/TRV30E/
TRV890E/TRV900E

DCR-TRV8E/TRV10E

DCR-TRV20E/TRV30E

DCR-TRV6E/TRV11E

DCR-TRV15E/TRV17E