Sony PCS-TL33 ユーザーズマニュアル
13
Names and Functions of Parts
Chapt
er 1 In
s
tall
a
a
tion and
P
rep
ar
ar
at
ion
i Online lamp
Shows mainly the incoming/outgoing call status.
Shows mainly the incoming/outgoing call status.
j
(Mic Off) button and indicator
Lets you suppress the sound from the local system. Press
the button again to resume sending the sound to the remote
system.
the button again to resume sending the sound to the remote
system.
k
(Videoconference) button and indicator
Serves for switching from computer screen to
videoconference screen.
videoconference screen.
l
(PC) button and indicator
Serves for switching to computer screen.
m
(Menu) button
Press to bring up the Setup menu.
Press and hold this button for 3 seconds during communication
to bring up the DTMF soft keyboard on the screen.
Press and hold this button for 3 seconds during communication
to bring up the DTMF soft keyboard on the screen.
n
(Power) switch and indicator
Turns power to the system on and off.
When using the system as a computer screen in PC mode,
pressing the switch once turns the power off.
When using the system in videoconference mode, pressing
the switch once sets the system to standby mode. To turn
the power off in videoconference mode, press the switch
again within 5 seconds of the first press.
When using the system as a computer screen in PC mode,
pressing the switch once turns the power off.
When using the system in videoconference mode, pressing
the switch once sets the system to standby mode. To turn
the power off in videoconference mode, press the switch
again within 5 seconds of the first press.
The power switch does not function during a
communication session.
communication session.
o
“Memory Stick” indicator
Shows the status of the “Memory Stick” slot.
Do not remove the “Memory Stick” when this indicator is lit.
Rear view
a Rear cover
Removing this cover gives access to the connector panel.
The connecting section between the stand and the display
is also located behind the panel. You can adjust the height
of the display by changing the screw positions.
Removing this cover gives access to the connector panel.
The connecting section between the stand and the display
is also located behind the panel. You can adjust the height
of the display by changing the screw positions.
Right side view
a “Memory Stick” slot
A “Memory Stick” can be inserted here.
A “Memory Stick” can be inserted here.
Connector panel
(section behind rear cover, seen from
below)
(section behind rear cover, seen from
below)
a DC19.5V connector
Connect the supplied AC adapter VGP-AC19V15 here.
Connect the supplied AC adapter VGP-AC19V15 here.
b AUDIO IN (PC sound input) jack (stereo mini
jack)
Connect this jack to the audio output of a computer
connected to the RGB IN connector.
connected to the RGB IN connector.
c RGB IN connector (15-pin mini D-sub connector)
Connect the RGB output of a computer here.
Connect the RGB output of a computer here.
d 100BASE-TX/10BASE-T port (modular port)
Use a Category 5 LAN cable to connect this port to a hub
or similar equipment.
This port is equipped with a Link/Data indicator (green)
and a 100/10 Mbps indicator (orange).
Use a Category 5 LAN cable to connect this port to a hub
or similar equipment.
This port is equipped with a Link/Data indicator (green)
and a 100/10 Mbps indicator (orange).
Note
Note
1
1
7
6
5
3 4
2
1