Sony SNCCX600 ユーザーズマニュアル

Op
er

at

ing t

he Camer

a

Configuration of Live Viewer

13

The image shot by the camera is shown here.
There are two modes for on-screen pan/tilt/zoom 
operation using a mouse: Area zoom mode and Vector 
dragging mode.
In the Area zoom mode, clicking will pan or tilt the 
camera towards the center of the image. The Area zoom 
will move the camera in the direction that displays the 
area selected by the operator and zooms in at the same 
time. The operator can choose a part of the image to 
view and zoom in by surrounding an area with a frame 
by dragging the mouse.
In the Vector dragging mode, the camera pans or tilts in 
the dragged direction. How long you drag the mouse 
determines the speed. Releasing the button on the mouse 
after dragging stops the panning or tilting of the camera.
You can also use the camera control panel bar to pan or 
tilt.
The zoom operation using the mouse wheel is available
in all modes.

There are two modes for on-screen pan/tilt/zoom 
operation using a mouse: Area zoom mode and Vector 
dragging mode. A control bar is displayed on the screen. 
In the Area zoom mode, clicking will pan or tilt the 
camera towards the center of the image. The Area zoom 
will move the camera in the direction that displays the 
area selected by the operator and zooms in at the same 
time. The operator can choose a part of the image to 
view and zoom in by surrounding the area with a frame 
by dragging the mouse.
In the Vector dragging mode, the camera pans or tilts in 
the dragged direction. How long you drag the mouse 
determines the speed. Releasing the button on the mouse 
after dragging stops the panning or tilting of the camera.
You can also use the tool bar to pan or tilt. 
The zoom operation using the mouse wheel is available 
in all modes.

The following operation buttons are available.

You can operate the camera by using the Solid PTZ 
function, which provides panning, tilting and zooming 
by adjusting the position and zooming ratio from the 
maximum image size (1280 × 720), without moving the 
camera. There are three modes of camera operation: 
Area zoom mode, Vector dragging mode and PTZ 
Control bar. You can control pan/tilt and zoom in either 
mode.
The available functions for the camera operation modes 
vary according to the live viewer display. The available 
functions are as follows.

Monitor screen

Control bar

 Setting

You can set the streaming method, image size, 
frame rate, PTZ operation mode and image codec.

 Streaming stop button

Stops streaming. (Appears while streaming.)

 Streaming start button

Starts streaming. (Appears while stops streaming.)

 Save still image button

Captures still images taken by the camera and saves 
them to the computer.