Sony SNCCX600 ユーザーズマニュアル

Ad
minis

tra

ting t

he Camer

a

Setting the Camera tampering detection/Motion detection — Action input Menu

47

Specify the minimum and maximum speeds to be 
detected.

• Min. speed and Max. speed can be specified within a 

scale of 100.

• The blue marker for minimum speed cannot be set to 

the right of the red marker for maximum speed.

• The squares indicating Min. speed and Max. speed 

move on the right and left sides of the preview screen.

The set value is only valid under the conditions of 
Intrusion or Passing.

Select the filter type you want to match and check Use 
as matching condition.
Select Filter 1, Filter 2 and Filter 3 in the list box of 
Matching decision.
Set the alarm to sound when the specified maximum 3 
conditions occur in sequence. If the conditions occur in 
a different order, the alarm will not sound. Select the 
condition from Intrusion, Passing or None.

Filter order switching button
Clicking 

 switches the order of filter between the 

neighouring methods.
e.g., If you click the button between 1 and 2, they will 
switch order. If you click the button between 2 and 3, 
they will switch order.

Specifying the time
Specify the reference interval in seconds between 1 and 
2, or 2 and 3.
For example, if 1 and 2 are set and “3 seconds” is 
specified, an alarm will sound when the inspection 
conditions of 2 are met within 3 seconds from when the 
inspection conditions of 1 are met.

x

The indicator is on when the set filter type conditions are 
met.

Click 

 to display the ActiveX area in full screen.

Clicking again will show the normal display.

Click 

 to hide the menu list on the left and enlarge the 

preview screen.
Clicking again will show the menu list as it was before.

Click OK to finalize any changes made to the settings 
and send them to the camera.
If you click Cancel, changes made to the settings will be 
discarded and the screen will be reloaded with the 
current camera settings.

Face detection responds to faces in the camera image 
and triggers an alarm.
When you click the Face detection tab, a dialog appears. 
Enter the user name and password.
The factory setting of the user name and password for 
the Administrator is set to “admin”.
Change the password from the factory setting for the 
security of your devices.

• Before actual use, perform an operation test and 

confirm that the face detection function works 
correctly.

• Perform the following before setting the face 

detection.
– Set Image size1 in the Video codec tab of the Video / 

Audio menu to the maximum rate.

– Deselect the checkbox of Image 1 in the PTZ 

control tab of the PTZ control menu.

– Deselect the checkbox of Stabilizer in the 

Installation tab of the System menu.

• Some parts at the top and bottom cannot be set.
• An inactive area cannot be specified.
• A horizontal face (leaning too far sideways) cannot be 

detected.

• Vertexes cannot be added or deleted. They are for 

specifying a rectangular area only.

• Even when privacy masking is used, the face detection 

function operates based on the images before masking 
is processed.