Sony SPP-A2480 ユーザーズマニュアル
39
US
Telephone Features
Telephone Features
ENTER NAME
SONY_
ABCDEFGHIJKLMNOP
QRSTUVWXYZ
SWITCH
QRSTUVWXYZ
SWITCH
NUMBER
SONY
1234567890123456
12_
01
12_
01
2
3456789*#
F P VIP PGM
Enter successive numbers in the same way.
When the phone number of 16 digits or more
has been entered, the phone number appears in
two lines.
When the phone number of 16 digits or more
has been entered, the phone number appears in
two lines.
7
Turn Jog Dial to choose “[PGM]”, and then
press Jog Dial.
You hear a long confirmation beep, and the
name and the number are stored.
The display goes off.
press Jog Dial.
You hear a long confirmation beep, and the
name and the number are stored.
The display goes off.
Notes
• Names cannot be entered using the dialing keys.
• Do not allow more than 20 seconds to elapse during the operation procedure.
• Names cannot be entered using the dialing keys.
• Do not allow more than 20 seconds to elapse during the operation procedure.
Tips
• When you select “[GO BACK]”, you can return to the previous set display by
• When you select “[GO BACK]”, you can return to the previous set display by
pressing Jog Dial.
• If you have entered a wrong name or number in step 4 or 6, turn Jog Dial to
choose “[
P]” then press Jog Dial or press (ERASE) to erase it. Then enter the
correct name or number.
• You may press (PROGRAM) instead of doing steps 5 and 7.
• Phone numbers can be entered using the dialing keys in step 6.
• Phone numbers can be entered using the dialing keys in step 6.
To store a number to be dialed via Private Branch Exchange
(PBX)
(PBX)
Before entering a phone number in step 6 on page 38, do as follows:
1
Enter the outside line access digit (e.g., 9).
2
Turn Jog Dial to choose “[P]” and then press Jog Dial, or
press (REDIAL/PAUSE).
press (REDIAL/PAUSE).
Changing a stored name and/or phone number
1
Display the name you want to change by doing
steps 1 to 3 on page 37.
The cursor is at the right of the name.
steps 1 to 3 on page 37.
The cursor is at the right of the name.
2
Turn Jog Dial to choose “[
P]”, then press Jog
Dial to erase the characters, and enter the new
name.
If you want to change only the number, skip this
step.
name.
If you want to change only the number, skip this
step.
continued