Sony STR-DH510 ユーザーズマニュアル

x NIGHT M.

Lets you to retain a theater-like environment at 
low volume levels. For details, see “Enjoying 
the surround effect at low volume levels 
(NIGHT MODE)” (page 46).
• NIGHT.OFF
• NIGHT. ON

You can make various adjustments for HDMI 
settings.

x CTRL.HDMI

Lets you turn the Control for HDMI function 
on or off. For details, see ““BRAVIA” Sync 
Features” (page 47).

x PASS.THRU

Lets you output the HDMI signals to the TV 
even when the receiver is in standby mode.
• ON

When the receiver is in the standby mode, 
the receiver continuously outputs HDMI 
signals from the receiver’s HDMI TV OUT 
jack.

• AUTO

When the TV is turned on while the receiver 
is in the standby mode, the receiver outputs 
HDMI signals from the receiver’s HDMI TV 
OUT jack. Sony recommends this setting if 
you use a TV that is compatible with 
“BRAVIA” Sync. This setting saves power 
in the standby mode compared with the 
“ON” setting.

• OFF

The receiver does not output HDMI signals 
when in the standby mode. Turn on the 
receiver to enjoy the connected component’s 
source on the TV. This setting saves power in 
the standby mode compared with the “ON” 
setting.

• This parameter is not available when 

“CTRL.HDMI” is set to “CTRL OFF”.

• When “AUTO” is selected, it may take a little more 

time for the image and sound to be output to the TV 
than when “ON” is selected.

• When the receiver is in standby mode, “HDMI” 

indicator will lights up if “PASS.THRU” is set to 
“AUTO” or “ON”. However, when 
“PASS.THRU” is set to “AUTO”, this indicator 
will lights off if no signals are detected.

x AUDIO.OUT

Lets you set the HDMI audio output from the 
playback component connected to the receiver 
via an HDMI connection.
• AMP

The HDMI audio signals from the playback 
component are only output to the speakers 
connected to the receiver. Multi channel 
sound can be played back as it is.

Audio signals are not output from the TV’s 
speakers when “AUDIO.OUT” is set to “AMP”.

• TV+AMP

The sound is output from TV’s speaker and 
the speakers connected to the receiver.

• The sound quality of the playback component 

depends on the TV’s sound quality, such as the 
number of channels, and the sampling frequency, 
etc. When the TV has stereo speakers, the sound 
output from the receiver is also stereo as that of 
the TV, even if you play back multi channel 
software.

• When you connect the receiver to an image 

display component (projector, etc.), sound may 
not be output from the receiver. In this case, 
select “AMP”.